JEUS Server Guide
		Next

JEUS Server Guide

JEUS v7.0 Fix #4

Copyright © 2017 TmaxSoft Co., Ltd. All Rights Reserved.

Restricted Rights Legend

All TmaxSoft Software (Tmax^®) and documents are protected by copyright laws and international convention. TmaxSoft software and documents are made available under the terms of the TmaxSoft License Agreement and may only be used or copied in accordance with the terms of this agreement. No part of this document may be transmitted, copied, deployed, or reproduced in any form or by any means, electronic, mechanical, or optical, without the prior written consent of TmaxSoft Co., Ltd.

Nothing in this software document and agreement constitutes a transfer of intellectual property rights regardless of whether or not such rights are registered) or any rights to TmaxSoft trademarks, logos, or any other brand features.

This document is for information purposes only. The company assumes no direct or indirect responsibilities for the contents of this document, and does not guarantee that the information contained in this document satisfies certain legal or commercial conditions.

The information contained in this document is subject to change without prior notice due to product upgrades or updates. The company assumes no liability for any errors in this document.

Trademarks

JEUS^® is registered trademark of TmaxSoft Co., Ltd. Other products, titles or services may be registered trademarks of their respective companies.

Open Source Software Notice

Some modules or files of this product are subject to the terms of the following licenses. : APACHE2.0, CDDL1.0, EDL1.0, OPEN SYMPHONY SOFTWARE1.1, TRILEAD-SSH2, Bouncy Castle, BSD, MIT, SIL OPEN FONT1.1

Detailed Information related to the license can be found in the following directory : ${INSTALL_PATH}/lib/licenses

Document Information

Document Name: JEUS Server Guide

Document Created: 2017-03-13

Software Version: JEUS v7.0 Fix #4

Document Version: v2.1.6

Table of Contents

About This Document

1. Introduction

1.1. Components

1.2. Domain Administration Server (DAS)

1.3. Managed Server (MS)

1.3.1. Engine Service

1.4. Class Loader Structure

1.5. Directory Structure

1.6. Launcher

1.7. INDEPENDENT Mode of Managed Server

2. JEUS Configuration

2.1. Overview

2.2. Adding Servers

2.2.1. Using WebAdmin
2.2.2. Using the Console Tool

2.3. Server Configurations

2.3.1. Basic Configurations
2.3.2. Listener Configuration
2.3.3. Thread Pool Configuration
2.3.4. Lifecycle Invocation Configuration
2.3.5. Resource Reference Configuration
2.3.6. Group Management Service (GMS) Configuration

3. Controlling and Monitoring JEUS Servers

3.1. Controlling and Monitoring Servers

3.1.1. Life Cycle of Managed Servers
3.1.2. Starting a Managed Server
3.1.3. Shutting Down a Managed Server
3.1.4. Suspending a Managed Server
3.1.5. Resuming a Managed Server

3.2. Server Engine Configuration

3.2.1. Option to Use an Engine
3.2.2. Engine Initialization Time Configuration

3.3. Controlling and Monitoring Threads

3.3.1. Thread Monitoring
3.3.2. Thread Control

3.4. Memory Monitoring and Control

3.4.1. Memory Monitoring
3.4.2. Memory Usage Control

4. JNDI Naming Server

4.1. Overview

4.2. Basic Concepts and Structure

4.2.1. Basic Concepts
4.2.2. Checking Bound Objects
4.2.3. JNDI Naming Server Architecture
4.2.4. JNDI Clustering

4.3. Configuring JNDI Naming Server

4.3.1. Configuring JNSServer
4.3.2. Configuring JNSClient

4.4. JNDI in Clustered Environment

4.4.1. Lookup

4.5. JNDI Programming

4.5.1. Configuring JEUS Environment
4.5.2. Configuring InitialContext Properties
4.5.3. Looking up Named Objects Using the Context
4.5.4. Using a Named Object
4.5.5. Closing a Context
4.5.6. Creating a Clustered Context
4.5.7. Remote Lookup

5. External Resources

5.1. Resource Types

5.2. Resource Configuration

5.2.1. Configuring a Data Source
5.2.2. Configuring a Mail Source
5.2.3. Configuring a URL Source
5.2.4. Configuring a Custom Resource
5.2.5. Configuring an External Resource (JMS)
5.2.6. External Resource Configuration (Tmax)

6. DB Connection Pool and JDBC

6.1. Overview

6.2. Data Sources and JDBC Connection Pooling

6.2.1. JDBC Driver
6.2.2. JDBC Connection Pool
6.2.3. Data Sources
6.2.4. Cluster Data Sources

6.3. Management of Data Sources and Connection Pools

6.4. Data Source Configuration

6.4.1. Configuration Method
6.4.2. Connection Pool Configuration

6.5. Cluster Data Source Configuration

6.5.1. Cluster Data Source Configuration
6.5.2. Configuration of the Component Data Source in a Cluster Data Source

6.6. Dynamically Changing Data Source Related Configurations

6.6.1. Adding a Data Source
6.6.2. Registering a Data Source on a Server
6.6.3. Removing a Data Source from a Server
6.6.4. Registering a Data Source in a Cluster
6.6.5. Removing Data Sources from a Cluster
6.6.6. Adding a Server to a Cluster
6.6.7. Removing a Server from a Cluster
6.6.8. Removing a Cluster
6.6.9. Removing a Data Source
6.6.10. Modifying Data Source Configuration
6.6.11. Checking Data Source Configuration

6.7. Dynamically Changing Cluster Data Source Configurations

6.7.1. Adding a Cluster Data Source
6.7.2. Registering a Cluster Data Source to a Server
6.7.3. Removing a Cluster Data Source from the Server
6.7.4. Registering a Data Source to a Cluster
6.7.5. Removing a Cluster from a Cluster Data Source
6.7.6. Adding a Server to a Cluster
6.7.7. Removing a Server from a Cluster
6.7.8. Removing a Cluster
6.7.9. Removing a Cluster Data Source
6.7.10. Changing Cluster Data Source Configurations
6.7.11. Checking the Cluster Data Source Configuration

6.8. JDBC Connection Pool Monitoring

6.8.1. Checking a JDBC Connection Pool List
6.8.2. Checking Detailed JDBC Connection Pool Information

6.9. Controlling the JDBC Connection Pool

6.9.1. Creating a Connection Pool
6.9.2. Disabling a Connection Pool
6.9.3. Enabling a Connection Pool
6.9.4. Replacing a Connection in a Connection Pool
6.9.5. Minimizing the Number of Connections in a Connection Pool

6.10. JEUS JDBC Programming

6.10.1. Getting a Connection from a Data Source
6.10.2. Transaction Programming Rules
6.10.3. Getting a Connection Implementation Instance of the JDBC Driver
6.10.4. Connection Pool in a Standalone Client

6.11. Global Transaction (XA) and Connection Sharing

6.12. Connection Pooling Service Support for Various Users

7. Transaction Manager

7.1. Overview

7.1.1. Application
7.1.2. JEUS Transaction Manager
7.1.3. Resource Manager

7.2. Server Transaction Manager Configurations

7.2.1. Worker Thread Pool
7.2.2. Timeout
7.2.3. Root Coordinator and Sub Coordinator
7.2.4. Transaction Join

7.3. Client Transaction Configurations

7.3.1. Transaction Manager
7.3.2. Transaction Manager Type
7.3.3. TCP/IP Port of the Transaction Manager
7.3.4. Worker Thread Pool
7.3.5. Timeout

7.4. Transaction Application Programming

7.4.1. Local Transaction
7.4.2. Client-Managed Transaction
7.4.3. Bean Managed Transaction
7.4.4. Container-Managed Transaction
7.4.5. Using a Transaction Manager

7.5. Transaction Recovery

7.5.1. Transaction Recovery Process
7.5.2. Recovery Related Log File
7.5.3. Recovery Related Configuration
7.5.4. Resource Manager Failure

7.6. Transaction Profile Function

7.7. Transaction Communication Problem between Servers with Different IP Bands

8.1. Overview

8.2. Basic JEUS Logger Structure

8.2.1. Outline
8.2.2. JEUS Launcher Logger
8.2.3. JEUS Server Logger
8.2.4. Access Logger
8.2.5. User Logger
8.2.6. Logger List
8.2.7. Log Messages with Module Names

8.3. Logging Configuration

8.3.1. Checking Logger Information
8.3.2. Dynamically Configuring a Logger
8.3.3. Standard Output and Standard Error Log Format Configuration
8.3.4. Logger Configuration
8.3.5. Log File Rotation Configuration
8.3.6. Property Configuration

A. Ports used in JEUS

A.1. Server Port

B. JDBC Data Source Configuration Examples

B.1. Overview

B.2. Oracle Thin (Type4) Configuration Example

B.2.1. Oracle Thin Connection Pool Data Source
B.2.2. Oracle Thin XA Data Source

B.3. Oracle OCI (Type2) Configuration Example

B.3.1. Oracle OCI Connection Pool Data Source

B.4. DB2 Configuration Example

B.4.1. DB2 Type4(JCC) Connection Pool Data Source
B.4.2. DB2 Type4(JCC) XA Data Source
B.4.3. DB2 Type2(JCC) XA Data Source

B.5. Sybase Configuration Example

B.5.1. Sybase jConnect 5.x Connection Pool Data Source
B.5.2. Sybase jConnect 6.x XA Data Source

B.6. MSSQL Configuration Example

B.6.1. MSSQL 2005 Connection Pool Data Source

B.7. Informix Configuration Example

B.7.1. Informix Connection Pool Data Source

B.8. Tibero Configuration Example

B.8.1. Tibero Connection Pool Data Source

B.9. MySQL 5.x Configuration Example

B.9.1. MySQL Connector/J Connection Pool Data Source

List of Figures

[Figure 1.1] JEUS Components
[Figure 1.2] Isolated Class Loader Hierarchy
[Figure 1.3] Server Directory Structure
[Figure 2.1] WebAdmin Server List
[Figure 2.2] WebAdmin Server Configuration Screen - Adding a Server (1)
[Figure 2.3] WebAdmin Server Configuration Screen - Adding a Server (2)
[Figure 2.4] WebAdmin Server Configuration Screen - Advanced Options
[Figure 2.5] WebAdmin Server Configuration Screen - Adding a Server (3)
[Figure 2.6] Adding a Server - System Thread Pool Configuration
[Figure 2.7] Adding a Server - Saving System Thread Pool
[Figure 2.8] Adding a Server - Adding a Basic Listener
[Figure 2.9] Adding a Server - Basic Listener Information Configuration
[Figure 2.10] Adding a Server - Saving Basic Listener Configurations
[Figure 2.11] Adding a Server - Basic Listener Configuration
[Figure 2.12] Adding a Server - Saving the Basic Listener Configuration
[Figure 2.13] Adding a Server - Web Engine Configuration
[Figure 2.14] Adding a Server - Applying Configuration Changes (1)
[Figure 2.15] Adding a Server - Applying Configuration Changes (2)
[Figure 2.16] Adding a Server - Applying Configuration Changes (3)
[Figure 2.17] Adding a Server - Checking the Newly Added Server
[Figure 2.18] Adding a Server - Starting the Newly Added Server (1)
[Figure 2.19] Adding a Server - Starting the Newly Added Server (2)
[Figure 2.20] Basic Listener Configuration
[Figure 2.21] Configuring a Listener
[Figure 2.22] Listener SSL Configuration
[Figure 2.23] Configuring Lifecycle Invocation in WebAdmin (1)
[Figure 2.24] Configuring Lifecycle Invocation in WebAdmin (2)
[Figure 2.25] Configuring Lifecycle Invocation in WebAdmin (3)
[Figure 2.26] Configuring Lifecycle Invocation in WebAdmin (4)
[Figure 2.27] Configuring Lifecycle Invocation in WebAdmin (5)
[Figure 2.28] Configuring Lifecycle Invocation in WebAdmin (6)
[Figure 2.29] Configuring Lifecycle Invocation in WebAdmin (7)
[Figure 2.30] Configuring Lifecycle Invocation in WebAdmin (8)
[Figure 2.31] Configuring Lifecycle Invocation in WebAdmin (9)
[Figure 2.32] Configuring Lifecycle Invocation in WebAdmin (10)
[Figure 2.33] Configuring Lifecycle Invocation in WebAdmin (11)
[Figure 2.34] Configuring Lifecycle Invocation in WebAdmin (12)
[Figure 2.35] Configuring Resource Reference in WebAdmin (1)
[Figure 2.36] Configuring Resource Reference in WebAdmin (2)
[Figure 2.37] Configuring Resource Reference in WebAdmin (3)
[Figure 2.38] Configuring Resource Reference in WebAdmin (4)
[Figure 2.39] Configuring Resource Reference in WebAdmin (6)
[Figure 3.1] State Transitions of a Managed Server(MS)
[Figure 3.2] Domain Server List
[Figure 3.3] Suspending a Domain Server
[Figure 3.4] Domain Server List
[Figure 3.5] Resuming a Domain Server
[Figure 3.6] Internal Server Engine Configuration
[Figure 3.7] Result of Configuring Server Engines
[Figure 3.8] Thread Monitoring Screen
[Figure 3.9] Checking Thread Information in WebAdmin
[Figure 3.10] Checking a Thread Stack Trace in WebAdmin
[Figure 3.11] System Information Monitoring Screen
[Figure 3.12] Checking Memory Information in WebAdmin
[Figure 4.1] JNDI List
[Figure 4.2] Detailed JNDI List (1)
[Figure 4.3] Detailed JNDI List (2)
[Figure 4.4] Relationship Between JNSServer and JNSClient
[Figure 4.5] JEUS JNDI Architecture in Clustered Environment
[Figure 4.6] Configuring Naming Server
[Figure 4.7] Configuring Common Thread Pool
[Figure 4.8] Configuring a Service Thread Pool
[Figure 5.1] Configuring a Resource in WebAdmin
[Figure 5.2] Configuring a Mail Source in WebAdmin(1)
[Figure 5.3] Configuring a Mail Source in WebAdmin(2)
[Figure 5.4] Configuring a URL Source in WebAdmin (1)
[Figure 5.5] Configuring a URL Source in WebAdmin(2)
[Figure 5.6] Configuring a Custom Resource in WebAdmin (1)
[Figure 5.7] Configuring a Custom Resource in WebAdmin (2)
[Figure 5.8] Configuring a Custom Resource in WebAdmin (3)
[Figure 5.9] Configuring a Custom Resource in WebAdmin(4)
[Figure 5.10] Configuring an External Resource in WebAdmin
[Figure 5.11] Adding a Jms Source in WebAdmin
[Figure 5.12] External Resource Configuration in WebAdmin (1)
[Figure 5.13] External Resource Configuration in WebAdmin (2)
[Figure 5.14] External Resource Configuration in WebAdmin (3)
[Figure 5.15] External Resource Configuration in WebAdmin (4)
[Figure 6.1] JEUS Connection Pooling
[Figure 6.2] RAC Cluster Data Source Failover
[Figure 6.3] Data Source and Connection Pool Management in JEUS Domain Structure
[Figure 6.4] Basic Data Source Configuration Screen (1)
[Figure 6.5] Basic Data Source Configuration Screen (2)
[Figure 6.6] Connection Pool Configuration Screen (1)
[Figure 6.7] Connection Pool Configuration Screen (2)
[Figure 6.8] Connection Pool Configuration Screen (3)
[Figure 6.9] Cluster Data Source Configuration Screen (1)
[Figure 6.10] Cluster Data Source Configuration Screen (2)
[Figure 6.11] Adding a Data Source to a Domain (1)
[Figure 6.12] Adding a Data Source to a Domain (2)
[Figure 6.13] Adding a Data Source to a Domain (3)
[Figure 6.14] Adding a Data Source to a Domain (4)
[Figure 6.15] Registering Data Sources on a Server (1)
[Figure 6.16] Registering Data Sources on a Server (2)
[Figure 6.17] Registering Data Sources on a Server (3)
[Figure 6.18] Registering Data Sources on a Server (4)
[Figure 6.19] Registering Data Sources on a Server (5)
[Figure 6.20] Removing a Data Source from a Server (1)
[Figure 6.21] Removing a Data Source from a Server (2)
[Figure 6.22] Removing a Data Source from a Server (3)
[Figure 6.23] Removing a Data Source from a Server (4)
[Figure 6.24] Checking the Unbound Data Source
[Figure 6.25] Registering Data Sources in a Cluster (1)
[Figure 6.26] Registering Data Sources in a Cluster (2)
[Figure 6.27] Registering Data Sources in a Cluster (3)
[Figure 6.28] Registering Data Sources in a Cluster(4)
[Figure 6.29] Checking the Data Source JNDI Bound to a Server (1)
[Figure 6.30] Checking the Data Source JNDI Bound to a Server (2)
[Figure 6.31] Removing a Data Source from a Cluster(1)
[Figure 6.32] Removing a Data Source from a Cluster (2)
[Figure 6.33] Removing a Data Source from a Cluster (3)
[Figure 6.34] Removing a Data Source from a Cluster (4)
[Figure 6.35] Checking the Unbound Data Source (1)
[Figure 6.36] Checking the Unbound Data Source (2)
[Figure 6.37] Adding a Server to a Cluster (1)
[Figure 6.38] Adding a Server to a Cluster (2)
[Figure 6.39] Adding a Server to a Cluster (3)
[Figure 6.40] Adding a Server to a Cluster (4)
[Figure 6.41] Checking the Data Source JNDI Bound to a Server
[Figure 6.42] Removing a Server from a Cluster (1)
[Figure 6.43] Removing a Server from a Cluster (2)
[Figure 6.44] Removing a Server from a Cluster (3)
[Figure 6.45] Removing a Server from a Cluster (4)
[Figure 6.46] Checking the Unbound Data Source
[Figure 6.47] Removing a Cluster (1)
[Figure 6.48] Removing a Cluster (2)
[Figure 6.49] Removing a Cluster(3)
[Figure 6.50] Checking a JNDI Unbound Data Source from a Server (1)
[Figure 6.51] Checking a JNDI Unbound Data Source from a Server (2)
[Figure 6.52] Removing a Data Source (1)
[Figure 6.53] Removing a Data Source (2)
[Figure 6.54] Removing a Data Source (3)
[Figure 6.55] Checking the Unbound Data Source
[Figure 6.56] Creating a Connection Pool (1)
[Figure 6.57] Creating a Connection Pool (2)
[Figure 6.58] Creating a Connection Pool (3)
[Figure 6.59] Changing Data Source Configurations (1)
[Figure 6.60] Changing Data Source Configurations (2)
[Figure 6.61] Changing Data Source Configurations (3)
[Figure 6.62] Changing Data Source Configurations (4)
[Figure 6.63] Connection Pool Runtime Information
[Figure 6.64] Checking the Data Source Configurations (1)
[Figure 6.65] Checking the Data Source Configurations (2)
[Figure 6.66] Adding a Cluster Data Source (1)
[Figure 6.67] Adding a Cluster Data Source (2)
[Figure 6.68] Adding a Cluster Data Source (3)
[Figure 6.69] Adding a Cluster Data Source (4)
[Figure 6.70] Registering a Data Source on a Server (1)
[Figure 6.71] Registering a Cluster Data Source on a Server (2)
[Figure 6.72] Registering a Cluster Data Source on a Server (3)
[Figure 6.73] Registering a Cluster Data Source on a Server (4)
[Figure 6.74] Checking the Cluster Data Source Bound to the Server
[Figure 6.75] Removing a Cluster Data Source from a Server (1)
[Figure 6.76] Removing a Cluster Data Source from a Server (2)
[Figure 6.77] Removing a Cluster Data Source from a Server (3)
[Figure 6.78] Removing a Cluster Data Source from a Server (4)
[Figure 6.79] Checking the Cluster Data Source Unbound from a Server
[Figure 6.80] Registering a Cluster Data Source to a Cluster (1)
[Figure 6.81] Registering a Cluster Data Source to a Cluster (2)
[Figure 6.82] Registering a Cluster Data Source to a Cluster (3)
[Figure 6.83] Registering a Cluster Data Source to a Cluster (4)
[Figure 6.84] Checking a Cluster JNDI Bound to a Server
[Figure 6.85] Removing a Cluster Data Source from a Cluster (1)
[Figure 6.86] Removing a Cluster Data Source from a Cluster (2)
[Figure 6.87] Removing a Cluster Data Source from a Cluster (3)
[Figure 6.88] Removing a Cluster from a Cluster Data Source (4)
[Figure 6.89] Checking Cluster Data Source Unbound from a Server
[Figure 6.90] Removing a Cluster Data Source (1)
[Figure 6.91] Removing a Cluster Data Source (2)
[Figure 6.92] Removing a Cluster Data Source (3)
[Figure 6.93] Checking the Cluster Data Source Unbound from a Server (1)
[Figure 6.94] Checking the Cluster Data Source Unbound from a Server (2)
[Figure 6.95] Changing the Cluster Data Source Configuration (1)
[Figure 6.96] Changing the Cluster Data Source Configuration (2)
[Figure 6.97] Changing the Cluster Data Source Configuration (3)
[Figure 6.98] Changing the Cluster Data Source Configuration (4)
[Figure 6.99] Checking the Cluster Data Source Configuration (1)
[Figure 6.100] Checking the Cluster Data Source Configuration (2)
[Figure 6.101] Checking Connection Pool List (1)
[Figure 6.102] Checking Connection Pool List (2)
[Figure 6.103] Checking Connection Pool Details (1)
[Figure 6.104] Checking Connection Pool Details (2)
[Figure 6.105] Creating a Connection Pool (1)
[Figure 6.106] Creating a Connection Pool (2)
[Figure 6.107] Creating a Connection Pool (3)
[Figure 6.108] Disabling a Connection Pool (1)
[Figure 6.109] Disabling a Connection Pool (2)
[Figure 6.110] Disabling a Connection Pool (3)
[Figure 6.111] Enabling a Connection Pool(1)
[Figure 6.112] Enabling a Connection Pool(2)
[Figure 6.113] Enabling a Connection Pool(3)
[Figure 6.114] Replacing a Connection in a Connection Pool (1)
[Figure 6.115] Replacing a Connection in a Connection Pool(2)
[Figure 6.116] Replacing a Connection in a Connection Pool
[Figure 6.117] Minimizing the Number of Connections in a Connection Pool (1)
[Figure 6.118] Minimizing the Number of Connections in a Connection Pool (2)
[Figure 6.119] Minimizing the Number of Connections in a Connection Pool (3)
[Figure 7.1] Relationship between Root Coordinator and Sub Coordinator
[Figure 7.2] Configuring a Common Thread Pool in WebAdmin
[Figure 7.3] Configuring a Dedicated Thread Pool in WebAdmin
[Figure 7.4] Changing the Timeout Setting in WebAdmin
[Figure 7.5] Simplified Transaction Recovery Process
[Figure 7.6] Automatic Transaction Recovery with WebAdmin
[Figure 7.7] Changing the Transaction Log Directory in WebAdmin
[Figure 8.1] Log Directory
[Figure 8.2] Configuring Log Home Path
[Figure 8.3] Checking jeus Logger Information in WebAdmin
[Figure 8.4] Example of Checking jeus Logger Information in WebAdmin
[Figure 8.5] Dynamically Configuring a Logger in WebAdmin (1)
[Figure 8.6] Dynamically Configuring a Logger in WebAdmin (2)
[Figure 8.7] Dynamically Configuring a Logger in WebAdmin(3)
[Figure 8.8] Dynamically Configuring a Logger in WebAdmin (4)
[Figure 8.9] Dynamically Configuring a Logger in WebAdmin (5)
[Figure 8.10] Dynamically Configuring a Logger in WebAdmin (6)
[Figure 8.11] Dynamically Configuring a Logger in WebAdmin (7)
[Figure 8.12] Configuring Standard Output and Error to JEUS Log Format in WebAdmin
[Figure 8.13] Logger Configuration Screen in WebAdmin
[Figure 8.14] Configuring Log File Rotation in WebAdmin
[Figure B.1] Configuring an Oracle Thin Connection Pool Data Source (1)
[Figure B.2] Configuring an Oracle Thin Connection Pool Data Source (2)
[Figure B.3] Configuring an Oracle Thin XA Data Source (1)
[Figure B.4] Configuring an Oracle Thin XA Data Source (2)
[Figure B.5] Configuring an Oracle OCI Connection Pool Data Source (1)
[Figure B.6] Configuring an Oracle OCI Connection Pool Data Source (2)
[Figure B.7] Configuring a DB2 Type4 Connection Pool Data Source (1)
[Figure B.8] Configuring a DB2 Type4 Connection Pool Data Source (2)
[Figure B.9] Configuring a DB2 Type4 XA Data Source (1)
[Figure B.10] Configuring a DB2 Type4 XA Data Source (2)
[Figure B.11] Configuring a DB2 Type2 XA Data Source (1)
[Figure B.12] Configuring a DB2 Type2 XA Data Source (2)
[Figure B.13] Configuring a Sybase jConnect 5.x Connection Pool Data Source (1)
[Figure B.14] Configuring a Sybase jConnect 5.x Connection Pool Data Source (2)
[Figure B.15] Configuring a Sybase jConnect 6.x XA Data Source (1)
[Figure B.16] Configuring a Sybase jConnect 6.x XA Data Source (2)
[Figure B.17] Configuring an MSSQL 2005 Connection Pool Data Source (1)
[Figure B.18] Configuring an MSSQL 2005 Connection Pool Data Source (2)
[Figure B.19] Configuring an Informix Connection Pool Data Source (1)
[Figure B.20] Configuring an Informix Connection Pool Data Source (2)
[Figure B.21] Configuring a Tibero Connection Pool Data Source (1)
[Figure B.22] Configuring a Tibero Connection Pool Data Source (2)
[Figure B.23] Configuring a MySQL Connector/J Connection Pool Data Source (1)
[Figure B.24] Configuring a MySQL Connector/J Connection Pool Data Source (2)

List of Examples

[Example 2.1] Adding a Server Using Jeusadmin
[Example 2.2] Dynamically Changing Configuration Using the Console Tool
[Example 2.3] <<LifeCycleTester.java>>
[Example 5.1] Custom Resource Class Example
[Example 5.2] Factory Class Example that Creates Custom Resources
[Example 5.3] Looking up, Adding, and Deleting Custom Resources in the Console Tool
[Example 5.4] jeus.external.ResourceBootstrapper
[Example 5.5] Viewing, Adding, and Deleting an External Resource in the Console Tool
[Example 6.1] jeus.jdbc.connectionpool.JEUSConnectionChecker
[Example 6.2] jeus.jdbc.helper.DataSourceSelector
[Example 6.3] DataSourceSelector Implementation Example
[Example 7.1] <<Client.java>>
[Example 7.2] <<Client.java>>
[Example 7.3] <<ProductManagerEJB.java>>
[Example 7.4] <<Client.java>>
[Example 7.5] <<ProductManagerEJB.java>>
[Example 7.6] <<Client.java>>
[Example 7.7] <<ProductManagerEJB.java>>
[Example 7.8] <<CoordinatorProfileListener.java>>
[Example 7.9] <<TransactionInfo.java>>
[Example 8.1] Log Messages Created by the Launcher during Startup Failure due to Configuration File Error
[Example 8.2] Server Log Message Output Example
[Example 8.3] Example of Server Log Message created with SimpleMillisFormatter
[Example 8.4] Example of access.log Record
[Example 8.5] Example of Checking jeus Logger Information in the Console Tool
[Example 8.6] Adding, Changing, and Deleting a Logger by using the Console Tool
[Example 8.7] Configuring Standard Output and Error to JEUS Log Format in Console Tool

		Next
		About This Document

Copyright © 2017 TmaxSoft Co., Ltd. All Rights Reserved.