Cause | The diskspace does not exist, or has not been mounted to the current TAS instance. |
Action | Check that the diskspace name is correct, the diskspace exists, and the diskspace has been mounted to the current TAS instance. |
Cause | The TAS disk is not found. |
Action | Check the TAS disk name. |
Cause | The name does not match the failure group name of the disks in the diskspace. |
Action | Check the failure group name. |
Cause | The TAS file is not found. |
Action | Check the TAS file name. |
Cause | The disk path does not exist among the disks discovered by the TAS instance. |
Action | Enter a disk path discovered by using the TAS_DISKSTRING parameter, or check the TAS_DISKSTRING parameter. |
Cause | Cannot create the given diskspace. |
Action | For more information, refer to the logs. |
Cause | The diskspace is already using the maximum number of disks. |
Action | Drop existing disk(s) from the diskspace or create a new diskspace. |
Cause | Cannot open the given disk. |
Action | For more information, refer to the logs. |
Cause | An attempt was made to add a disk, which is from another diskspace mounted on the current instance, to the diskspace. |
Action | Use another disk. Unless the diskspace of the disk is unmounted, the FORCE option has no effect. |
Cause | The name specified with CREATE DISKSPACE is already being used by another diskspace. |
Action | Select another name. |
Cause | The disk size is too small to add the disk to the diskspace. |
Action | Check if the system settings are correct. |
Cause | Failed to remove the diskspace. |
Action | For more information, refer to the logs. |
Cause | TAS was booted without creating a diskspace. |
Action | After booting TAS in nomount mode, create a diskspace and then reboot the TAS. |
Cause | The path prefix (+) or path delimiter (/) is not valid. |
Action | Check the path character array. |
Cause | The TAS disk path is too long. |
Action | Specify a TAS disk path of 256 characters or less. |
Cause | Failed to open the disk, perform disk I/O, or the magic value does not match. |
Action | For more information, refer to the logs. |
Cause | Failed to add the disk. |
Action | Check the tracelog to fix the problem and then try again. |
Cause | Failed to drop the disk. |
Action | Check the tracelog to fix the problem and then try again. |
Cause | Failed to create the file. |
Action | Check the tracelog to fix the problem and then try again. |
Cause | Failed to delete the file. |
Action | Check the tracelog to fix the problem and then try again. |
Cause | Failed to change the file size. |
Action | Check the tracelog to fix the problem and then try again. |
Cause | Failed to connect to the IP address and port. |
Action | Check that the specified port is not already occupied and then try again. |
Cause | Unknown network error has occurred. |
Action | Check that the network equipment is operating normally and then try again. |
Cause | A TAS internal error occurred. |
Action | Contact the technical support team. |
Cause | The disk size entered is larger than the actual disk size. |
Action | Enter a valid size. |
Cause | The specified name is already in use. |
Action | Enter another disk name. |
Cause | The specified path was entered multiple times. |
Action | The disk path can only be entered once. |
Cause | The disk space specified in \'%1$s\' does not match that specified in the DDL statement. |
Action | Set a valid disk space. |
Cause | The character device size must be entered. |
Action | Enter a valid size. |
Cause | One or more disks are offline. |
Action | Remove the offline disks or bring them online. |
Cause | Attempted to execute a command for a TAS user that does not exist. |
Action | Use an existing TAS user name, or add a new TAS user. |
Cause | Attempted to use a name that is a duplicate of an existing TAS user. |
Action | Create a new unique TAS user name. |
Cause | Attempted to execute a command for a TAS group that does not exist. |
Action | Use an existing TAS group name, or add a new TAS group. |
Cause | Attempted to use a name that is a duplicate of an existing name. |
Action | Create a new unique TAS group name. |