Cause | An invalid storage server name was used in a statement for creating a storage server. |
Action | Set the storage server name identically to the name set in the SSVR_NAME of a tip file, or omit the name. |
Cause | In the storage server mode, this DDL cannot be executed. |
Action | This DDL cannot be executed. |
Cause | The name is duplicated or a disk with the specified name could not be found. |
Action | Check the disk name. |
Cause | The path is invalid or a disk at the specified path could not be found. |
Action | Check the disk path. |
Cause | Check the tracelog to view the causes of failure. |
Action | Retry after resolving errors. |
Cause | Incorrect fetch information was fetched in DB. |
Action | Retry after resolving error. |
Cause | SSVR_WTHR_CNT is smaller than sdisk count. |
Action | Retry after increasing the SSVR_WTHR_CNT value. |
Cause | Invalid gdisk ID was used to request DB read/write. |
Action | Retry after resolving error. |
Cause | Invalid gdisk ID was used to request DB read/write. |
Action | Retry after resolving error. |
Cause | Read/write permissions are required for the disk. |
Action | Grant read/write permissions on the disk. |
Cause | Specified gdisk information is invalid. |
Action | Check whether the range overlaps with a previously created gdisk or whether the information fits 32k alightment. |
Cause | Failed to get IP from hostname. |
Action | Check whether _RDS_NW_IP is valid. |
Cause | Failed to send message. |
Action | Check the network status and log. |
Cause | Failed to receive message. |
Action | Check the network status and log. |
Cause | Flashcache was not synchronized for the modified block. |
Action | Check whether synchronization was performed in another session. |
Cause | Failed to create SFC. |
Action | Check whether a duplicate SFC was created or whether SFC was created in MOUNT mode. |
Cause | Failed to delete SFC. |
Action | Check whether the SFC to be deleted exists or whether SFC was deleted in MOUNT mode. |
Cause | Read/write permissions are required for the flash. |
Action | Grant read/write permissions on the flash. |
Cause | The path is invalid or a flash at the specified path could not be found. |
Action | Check the flash path. |
Cause | The share value is invalid. |
Action | Modify the share value. |
Cause | The level value is invalid. |
Action | Specify the level to a value between 1 and 8. |
Cause | The allocation value is invalid. |
Action | Modify the allocation value. |
Cause | The sum of the share values is too large. |
Action | Decrease the total share value. |
Cause | The allocation sum exceeds 100. |
Action | Modify the allocation value. |
Cause | The number of directives of the DB plan that uses share is too high. |
Action | Decrease the number of directives of the DB plan that uses share. |
Cause | The number of directives of the DB plan that uses level is too high. |
Action | Decrease the number of directives of the DB plan that uses level. |
Cause | The number of directives of the category plan is too high. |
Action | Decrease the number of directives of the category plan. |
Cause | The directive name is a duplicate. |
Action | Change the directive name. |
Cause | The OTHER directive is missing. |
Action | Specify the OTHER directive. |
Cause | The size of flash log is invalid. |
Action | Change the directive flash log size. |
Cause | Specified flash device size is too small. |
Action | Increase the directive flash device size. |